Air Duct Assemblies The Cabtron Air Duct assembly exhausts cool, clean filtered air directly into hot spot areas of the cabinet and around chassis and drawers. Air Ducts may be assembled to any Cabtron Blower System (except 150 CFM) and mount flush with the side of the frame. Cabtron Blower Systems have two exhaust ports; both may be ducted, or one port may run free and the other ducted. Air Ducts are supplied with 90 degree air deflectors directing the air toward the front of the cabinet. 50% of the exhaust ports have 90 degree deflectors and the balance are closed with cover plates. Constructed of prime 20 gauge (.036) steel and finished in Cabtron's light gray finish. 1-1/2" x 5" air exhausts are spaced in 7" increments starting 1/2" from top of duct. A steel elbow is fastened to Cabtron's blower and air duct assembly. (NOTE: Not available for use with BL-150 blower) Back   CMP Enclosures 3901 Grove Avenue, Gurnee, Illinois 60031 Phone 847.244.3230 Toll Free 1.888.CMP.ENCL (1.888.267.3625) Fax 847.244.3257 E-mail: info@enclosures.com