Adjstable Chassis Bracket Cabtron Adjustable Chassis Brackets are capable of supporting heavy loads and relieving stress to front panel mounted equipment affording maximum adjustability. When full cabinet depth chassis brackets are not required shorter chassis brackets may be used by ordering an additional pair of mounting angles.Brackets consist of four parts, two support brackets bolted across the front and rear mounting angles. The two chassis guides bolt across the two support brackets. All parts are fabricated of prime 12 gauge cold rolled steel and zinc plated with yellow chromate in accordance with ASTM-B633-78 SC2, Type II. Chassis supports are adjustable vertically along the mounting angles and the chassis guides are adjustable horizontally along the chassis supports to any chassis width. When using chassis brackets in sloped opening of console frames it is necessary to order 2-MA21 mounting angles. Back   CMP Enclosures 3901 Grove Avenue, Gurnee, Illinois 60031 Phone 847.244.3230 Toll Free 1.888.CMP.ENCL (1.888.267.3625) Fax 847.244.3257 E-mail: info@enclosures.com